Micro Light Cannon 2019

LDR24-16 Specifications Input Range: 100~240VAC Frequency Range: 50/60 Hz Output: 24VDC (+/- 4%) Max. Output Current: 0.67A Max. Output Power: 16W Dimensions W 1.6" x L 5.9" x H 1.3" LED Module Capacity 2.6Watt LED Modules: 6 each LDR24-25 Specifications Input Range: 100~240VAC Frequency Range: 50/60 Hz Output: 24VDC (+/- 4%) Max. Output Current: 1.05A Max. Output Power: 25W Dimensions W 1.6" x L 5.9" x H 1.3" LED Module Capacity 2.6Watt LED Modules: 9 each LDR24-40 Specifications Input Range: 100~240VAC Frequency Range: 50/60 Hz Output: 24VDC (+/- 4%) Max. Output Current: 1.67A Max. Output Power: 40W Dimensions W 1.7" x L 6.4" x H 1.3" LED Module Capacity 2.6Watt LED Modules: 15 each Power Supplies Micro Light Cannon is ETL Listed when operated from our selection of 24VDC LED drivers. These Class 2 power supplies range from 16 to 96 watts. The input is universal ranging from 100 to 240VAC 50/60 Hz LDR24-96 Tokistar's LDR24-96 has a 96Watt output. Specifications Input Range: 100~240VAC Frequency Range: 50/60 Hz Output: 24VDC (+/- 3%) Max. Output Current: 4.0A Max. Output Power: 96W LED Module Capacity 2.6Watt LED Modules: 36 each Part #: LC-1CH-MULTI Max. Load: 96 watts @ 24VDC Dimensions: 3/4" x 1-3/4" x 3-1/2" Weight: 50g / 0.11 lbs Listing: ETL Listed/CE Certified Operating Temperature: 0~+50ºC Analog Mode 0/1-10 VDC For operation from devices using 0/1-10VDC protocol, up to 10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required. DMX Mode In this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters. Manual Mode You may select a light intensity at which the fixtures operate. In this case, no external dimming device is required. LC-1CH-MULTI System Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or 0/1-10VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer. Our MagneticWand can also be used in conjunction with the LC-1CH-MULTI. Wiring Diagram TOKISTAR ® LIGHTING INC. 1015 E. Discovery Lane • Anaheim, CA 92801 Tel: 714.772.7005 • Fax: 714.772.7014 • Toll free in USA: 877.340.7633 Email: info@tokistar.com • Website: www.tokistar.com Dimming 8.8" 2.7" 1.6" 0/1-10 VDC In DMX In LED Driver Micro Light Cannon 24 VDC Output Yellow Wire: PWM Signal Red Wire: +V 0/1-10 VDC to next Dimmer Pack DMX next Dimmer Pack 100~240 VAC Input Dimmer Pack 24 VDC Input Black Wire: -V Red Wire: +V Black Wire: -V © 2019 TOKISTAR LIGHTING INC. / V1.0 L W H

RkJQdWJsaXNoZXIy Nzg3OTc=