Dimming

LC-1CH-MULTI Dimming System/24 VDC

Tokistar’s LC-1CH-MULTI dimmer pack is compatible with industry-standard dimmers working on DMX or 0/1-10 VDC
protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.

Part #: LC-1CH-MULTI
Technical Specifications:
Max. Load: 96 Watts @ 24 VDC
Environmental Rating: Dry Location/IP20
Dimensions: 3/4″ x 1-3/4″ x 3-1/2″
Weight: 50g / 0.11 lbs
Listing: ETL Listed/CE Certified
Operating Temperature: 0~+50oC

DMX Mode
In this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 dimmer packs may be connected in series. For applications exceeding 36 dimmer packs, a splitter is required. Consult factory on details of
DMX splitters.

Analog Mode 0/1-10 VDC
For operation from devices using 0/1-10 VDC protocol, up to
10 dimmer packs may be connected in series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.

Manual Mode
You may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.

Dual output LED drivers require a dimmer pack for each output.

LC Dimming System/24 VDC

This proprietary dimming system provides full-range dimming of LEDs from our LED drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.

Part #: LC-DMR
The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED driver powering the first dimmer pack. The unit installs in a single-gang box.

Part #: LC-1CH-DP
Each dimmer pack receives a 24 VDC input from an LED driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable.
Max. Load: 96 Watts @ 24 VDC
Dimensions: 1-1/2″ x 3-1/2″ x 4-1/16″

TokiLinear RGB Lighting Controllers

Part #: LC-3CH-CM
The Control Station is provided with a 50 foot CAT5 cable. Power to this unit comes from the LED driver powering the first dimmer pack. The unit installs in a double-gang junction box.
Color Mix features include:
• Cross-Fading, Fading, Flashing and Demo Mode
• Ten memory locations to mix and store your favorite color selections
• Six animation patterns which cycle between favorite color selections
• Rotary dials for precise color mixing/speedrate adjustment
• Adjustable fading/flashing rate
• Control station includes color-changing LED indicator
Part #: LC-3CH-DP
Dimmer packs are capable of operating up
to 26.25′ of TokiLinear RGB (96 watts/4 amps maximum). Dimensions: 1-1/2″ x 3-1/2″ x 4-1/16″

Our economical Color Mix System is capable of being operated on demand. Each dimmer pack operates up to 26.25′ / 8M of TokiLinear RGB. CAT5 cable with RJ45 connectors on each end link the components together. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the LC-3CH-CM control station to the last dimmer pack. CAT5 cables are included with units.

Dual output LED drivers require a dimmer pack for each output.

DMX Dimming System

DMX dimmer packs are capable of operating up to 26.25’/8M of TokiLinear RGB (96 watts/4 amps maximum). Dimmer packs are addressable and may be used with any controller working on DMX protocol.

Part #: LC-3CH-DMX
Max. Load: 96 Watts @ 24 VDC
Environmental Rating: Dry Location/IP20
Dimensions: 3/4″ x 1-3/4″ x 3-1/2″
Weight: 50g / 0.11 lbs
Listing: ETL Listed/CE Certified
Operating Temperature: 0~+50ºC