TOKISTAR LIGHTING

TokiLum | Basic System

TokiLum's high-output, 0.48-Watt LEDs are permanently sealed to a flexible cable for easy installation, and the compact profile makes the system a great choice for use in shallow ceiling coves and other confined spaces. TokiLum's high-output LEDs are offered in color temperature choices of 3000K and 6500K, and the system's profile measures only 3/8" high by 3/4" wide.

How to Specify

TokiLum is available in LED module spacings of 2” and 4”. LEDs can be specified 3000K or 6500K.

.

Mounting Options

Mounting Track
Part #: TRI-MT LED modules snap into a semi-rigid track. The track is fastened with screws, hi-bond adhesive tape or construction adhesive.

Panel Fasteners Part #: TRI-PF TokiLum is easily incorporated into display panels and signs with our panel fasteners. The LED module is inserted from behind, concealing all wiring.

Mounting Clamps Part #: TRI-MC For maximum flexibility, TokiLum can be attached with clamps. Each clamp is fastened with a screw concealed behind the fixture.
		^

Power Supplies

Tokistar’s LDR6-60 is a 60 Watt UL Recognized Class 2 LED Driver used to convert an AC input into a 6 VDC output. It may be operated from a wide range of input voltages. The enclosure is suitable for wet locations. TokiLum is Wet-Location Listed when operated from our LED Drivers	Part #: LDR6-60	Specifications Input Range: 100~240 VAC Frequency Range: 50/60 Hz Output: 6 VDC (Adjustable +10% / -25%) Max. Output Current: 5.0A x 2 channels Max. Output Power: 30W x 2 channels Protection: Overload, Overcurrent, Short Circuit Operating Temperature: -30ºC to +60ºC Mechanical Specifications Dimensions: 3” x 9.75” x 2” Weight: 1.94 lbs Enclosure Rating: Nema 3/IP65 Mounting: Flange Mount Connection: Knockouts for 1/2” Conduit Compliance/Safety Standards: UL Recognized Class 2/EN60950 TokiLum Capacity 0.48 Watt LEDs: 124 pieces
.

Dimmers

LC Dimming System
This proprietary Dimming System provides full-range dimming of TokiLum LEDs. The remote wall dimmer controls up to twelve dimmer packs.

Remote Wall Dimmer (Part #: LC-DMR)

The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first Dimmer Pack. A 50 foot CAT5 cable is provided with each unit.

Dimmer Pack (Part #: LC-1CH-DP)

Each dimmer pack receives one of the two 6 VDC outputs from an LDR6-60 LED Driver. A 25 foot CAT5 cable is provided with each unit.
Size: 1-1/2” x 3-1/2” x 4-1/16”

DMX Dimming System

For applications operating from DMX dimming systems, we offer a dimmer pack operating on DMX protocol. These dimmer packs have four outputs rated at 30 Watts each.

DMX Dimmer Pack (Part #: LC-4CH-DMX)

Each dimmer pack accepts up to four of the 6 VDC outputs from LDR6-60 LED Drivers. Data is communicated to the dimmer pack with CAT5 cable. Each of the four channels is independently addressable. When assigned to the same channel, all fixtures will dim in unison. Size: 3-1/4” x 4-1/2” x 11”