|
|
Tokistar offers a wide variety of mounting devices. The proper selection is determined by the surface Tapelight is attached to. In addition to the devices shown, construction adhesives capable of adhering well to PVC may be used.
|
|
|
|
Bracket and Staples
Brackets and staples provide secure mounting. The proper quantity and positioning is determined by the specifics of each application. When turning corners, a device should be used at the start of each bend. |
|
|
|
|
|
|
Adhesive Tape
Adhesive tapes work best on smooth surfaces. The WFT-32 roll is for use with TLP and TLW Series Tapelight. The WFL-108 and WFL-20 rolls are exterior-grade adhesive tapes for use with LS Series Tapelight.
|
|
|
|
|
|
Mounting Track
The RC-S is a semi-rigid polycarbonate track which can be securely mounted in place with screws to any surface. This provides a smooth surface to apply adhesive tapes on, and ensures perfect linear integrity. |
|
|
|
|
|
|
Panel Fastener
The SH-02 metal fasteners are used to securely lock sockets in place for panel mounting. Tapelight sockets are pushed through the hole in the panel from behind, and the fastener is pressed in place from above.
|
|
|
|
|
|
Cord Protectors and End Caps
|
|
Cord Protectors are required to insulate the lead wire soldered to the beginning of each Tapelight, and End Caps are attached to the end. |
|
|
|
|
 |
|
|
|
|
|
|
Decorative Channels provide added appeal in high-visibility applications. Tapelight is installed to the base with adhesive tape, and the clear cover snapped in place. These channels may be used with all TokiLeds, TB-101 and BB-301 incandescent lamps.
 
|
|
|
|
|
|
Silicone caps provide protection to LS Series Tapelight for exterior use. When incandescent lamps are used in harsh environments, the WP-101C and WP-105C caps provide an additional measure of protection. |
|
|
|
|
| |
|
|
|
|
Tokistar Lighting
